MeshWX Pro
Pick the hardware list for the version you chose

Which MeshWX Pro hardware do you need?

You only use one MeshWX Pro version. Jump directly to the hardware list for Firmware or the App.

Firmware hardware Dedicated U.S. device Use this list if you chose Firmware: no separate computer, Wi-Fi required on the device, United States only. View Firmware hardware ↓ App hardware International or normal node use Use this list if you chose the App: keep normal Meshtastic/MeshCore firmware, USB or TCP/IP, and international coverage. View App hardware ↓
Firmware and App are separate choices Meshtastic + MeshCore Only directly tested hardware is listed
Firmware hardware

Certified devices for MeshWX Pro Firmware.

Use this section only if you chose MeshWX Pro Firmware. These Wi-Fi devices have passed Firmware testing and can run MeshWX Pro without a separate computer. While the Firmware is installed, the device is dedicated to MeshWX Pro.

Heltec WiFi LoRa 32 V4 supported by MeshWX Pro Certified MeshWX Pro Firmware device
Heltec Automation

Heltec WiFi LoRa 32 V4

The Heltec V4 passed MeshWX Pro Firmware testing and can run as a dedicated National Weather Service alert broadcaster for Meshtastic or MeshCore without a separate computer after setup.

5/5 compatibility · Passed MeshWX Pro Firmware and MeshWX Pro App compatibility testing.
  • Meshtastic + MeshCore
  • MeshWX Pro Firmware certified
  • Phone-based configuration
  • No separate computer after setup
  • Always-on operation
  • Also tested with MeshWX Pro App
Flash MeshWX Pro Firmware Buy Heltec V4
Good to know: MeshWX Pro Firmware is currently a United States-only beta, supports selectable Meshtastic or MeshCore operation, requires Wi-Fi at the broadcaster, and the initial firmware flash must be completed from desktop Chrome or Edge.
Heltec WiFi LoRa 32 Expansion Kit supported by MeshWX Pro Certified MeshWX Pro Firmware device
Heltec Automation

Heltec WiFi LoRa 32 Expansion Kit

The Heltec Expansion Kit passed MeshWX Pro Firmware testing and can run as a dedicated National Weather Service alert broadcaster for Meshtastic or MeshCore without a separate computer after setup.

5/5 compatibility · Passed MeshWX Pro Firmware and MeshWX Pro App compatibility testing.
  • Meshtastic + MeshCore
  • MeshWX Pro Firmware certified
  • Phone-based configuration
  • No separate computer after setup
  • Always-on operation
  • Also tested with MeshWX Pro App
Flash MeshWX Pro Firmware Buy Heltec Expansion Kit
Good to know: MeshWX Pro Firmware is currently a United States-only beta, supports selectable Meshtastic or MeshCore operation, requires Wi-Fi at the broadcaster, and the initial firmware flash must be completed from desktop Chrome or Edge.
Heltec WiFi LoRa 32 V3 supported by MeshWX Pro Certified MeshWX Pro Firmware device
Heltec Automation

Heltec WiFi LoRa 32 V3

A compact ESP32-based LoRa board with Wi-Fi and a built-in display. Once flashed with MeshWX Pro, it becomes a dedicated National Weather Service alert broadcaster for Meshtastic or MeshCore.

5/5 compatibility · Passed MeshWX Pro Firmware and MeshWX Pro App compatibility testing.
  • Meshtastic + MeshCore
  • On-device Wi-Fi
  • Built-in status display
  • Phone-based configuration
  • No separate computer after setup
  • Low-power, always-on operation
Flash MeshWX Pro Firmware Buy Heltec V3
Good to know: MeshWX Pro Firmware is currently a United States-only beta, supports selectable Meshtastic or MeshCore operation, requires Wi-Fi at the broadcaster, and the initial firmware flash must be completed from desktop Chrome or Edge.
Elecrow ThinkNode M7 supported by MeshWX Pro Certified MeshWX Pro Firmware device
Elecrow

ThinkNode M7

The ThinkNode M7 is also supported by MeshWX Pro and can run as a dedicated National Weather Service alert broadcaster for Meshtastic or MeshCore without a separate computer after setup.

5/5 compatibility · Passed MeshWX Pro Firmware and MeshWX Pro App compatibility testing.
  • Meshtastic + MeshCore
  • MeshWX Pro Firmware compatible
  • Phone-based configuration
  • No separate computer after setup
  • Always-on operation
  • Also tested with MeshWX Pro App
Flash MeshWX Pro Firmware Buy ThinkNode M7
Good to know: MeshWX Pro Firmware is currently a United States-only beta, supports selectable Meshtastic or MeshCore operation, requires Wi-Fi at the broadcaster, and the initial firmware flash must be completed from desktop Chrome or Edge.
M5Stack Cardputer Mesh Kit certified for MeshWX Pro Certified MeshWX Pro Firmware device
M5Stack

M5Stack Cardputer Mesh Kit

A portable ESP32-S3 LoRa terminal with an integrated display, keyboard, battery, and SX1262 radio. It passed MeshWX Pro Firmware testing and is certified as a dedicated National Weather Service alert broadcaster for Meshtastic or MeshCore.

5/5 compatibility · Passed MeshWX Pro Firmware and MeshWX Pro App compatibility testing.
  • Meshtastic + MeshCore
  • ESP32-S3 controller
  • 1.14-inch built-in display
  • 56-key integrated keyboard
  • 1750mAh built-in battery
  • SX1262 LoRa module
Flash MeshWX Pro Firmware Buy M5Stack Cardputer Mesh Kit
Good to know: MeshWX Pro Firmware is currently a United States-only beta, supports selectable Meshtastic or MeshCore operation, requires Wi-Fi at the broadcaster, and the initial firmware flash must be completed from desktop Chrome or Edge.
App hardware

Radios tested with MeshWX Pro App.

Use this section if you chose MeshWX Pro App. The App keeps the radio running its normal Meshtastic or MeshCore firmware and connects over USB serial or TCP/IP. This is also the hardware path for users outside the United States.

Elecrow ThinkNode M7 tested with MeshWX Pro App Tested and working App

Elecrow

ThinkNode M7

Connected directly to MeshWX Pro App and confirmed to send alerts successfully.

5/5 compatibility · Passed MeshWX Pro Firmware and MeshWX Pro App compatibility testing.
Connection
USB serial
Tested with
Meshtastic
Buy ThinkNode M7
Heltec V3 tested with MeshWX Pro App Tested and working App

Heltec Automation

Heltec V3

Connected directly to MeshWX Pro App and confirmed to send alerts successfully.

5/5 compatibility · Passed MeshWX Pro Firmware and MeshWX Pro App compatibility testing.
Connection
USB serial
TCP/IP
Tested with
Meshtastic
MeshCore
Buy Heltec V3
Heltec WiFi LoRa 32 V4 tested with MeshWX Pro App Tested and working App

Heltec Automation

Heltec V4

Connected directly to MeshWX Pro App and confirmed to send alerts successfully.

5/5 compatibility · Passed MeshWX Pro Firmware and MeshWX Pro App compatibility testing.
Compatibility
USB serial
TCP/IP
Tested with
Meshtastic
MeshCore
Buy Heltec V4
Heltec WiFi LoRa 32 Expansion Kit tested with MeshWX Pro App Tested and working App

Heltec Automation

Heltec WiFi LoRa 32 Expansion Kit

Connected directly to MeshWX Pro App and confirmed to send alerts successfully over USB serial and TCP/IP with both Meshtastic and MeshCore.

5/5 compatibility · Passed MeshWX Pro Firmware and MeshWX Pro App compatibility testing.
Compatibility
USB serial
TCP/IP
Tested with
Meshtastic
MeshCore
Buy Heltec Expansion Kit
M5Stack Cardputer Mesh Kit tested with MeshWX Pro App Tested and working App

M5Stack

Cardputer Mesh Kit

Connected directly to MeshWX Pro App and confirmed to send alerts successfully.

5/5 compatibility · Passed MeshWX Pro Firmware and MeshWX Pro App compatibility testing.
Compatibility
USB serial
TCP/IP
Tested with
Meshtastic
Buy Cardputer Mesh Kit
RAKwireless WisMesh Tag tested with MeshWX Pro App Tested and working App

RAKwireless

WisMesh Tag

Connected directly to MeshWX Pro App over USB serial and confirmed to work with both Meshtastic and MeshCore.

5/5 compatibility · Passed MeshWX Pro App compatibility testing.
Connection
USB serial
Tested with
Meshtastic
MeshCore
Buy WisMesh Tag
RAKwireless WisMesh Pocket V2 tested with MeshWX Pro App Tested and working App

RAKwireless

WisMesh Pocket V2

Connected directly to MeshWX Pro App and confirmed to send alerts successfully.

5/5 compatibility · Passed MeshWX Pro App compatibility testing.
Connection
USB serial
Tested with
Meshtastic
Buy WisMesh Pocket V2
Seeed Studio SenseCAP Card Tracker T1000-E tested with MeshWX Pro App Tested and working App

Seeed Studio

SenseCAP Card Tracker T1000-E

Connected directly to MeshWX Pro App and confirmed to send alerts successfully.

5/5 compatibility · Passed MeshWX Pro App compatibility testing.
Connection
USB serial
Tested with
Meshtastic
Buy Tracker T1000-E
Seeed Studio SenseCAP MeshTracker X1 tested with MeshWX Pro App Tested and working App

Seeed Studio

SenseCAP MeshTracker X1

Connected directly to MeshWX Pro App over USB serial and confirmed to work with both Meshtastic and MeshCore.

5/5 compatibility · Passed MeshWX Pro App compatibility testing.
Compatibility
USB serial
Tested with
Meshtastic
MeshCore
Buy MeshTracker X1
Affiliate disclosure: Some links on this page may be affiliate links. We may earn a small commission from qualifying purchases at no additional cost to you. These commissions help fund continued MeshWX Pro development.

Experimental software notice: MeshWX Pro is beta and experimental firmware. Flashing custom firmware carries risk and may cause device malfunction, data loss, or render a device unusable. By using the MeshWX Pro software or flasher, you accept those risks. MeshWX Pro is not responsible for damage, loss, or a bricked device resulting from installation or use.